| Water / Alcohol Navigation | |||||||
| Home | |||||||
Before You Begin
| Parts List
| Installation
| Articles & Testimonials
| Links & Credits
| Contact Me
| Like cars? | Visit The Turbo Blog
| |
|
Before You Begin It's important that you read through everything on this site in addition to your own research before installing a water/alcohol injection system on your car. I've also made a short list of supporting mods/items that are recommended before attempting this install. A Healthy Motor A perfect running motor should be the first step in any modification plans. This includes, but is not limited to: Spark Plugs, Wires, Good Compression, Timing properly adjusted, Cooling System maintained, etc. EGT and/or a Datalogger: Since this is a kit that may require tuning, (nozzle size, when to activate the system, possibly leaning or richening the fuel mixture, etc) it is necessary to have some way to monitor and record how your engine is performing. Why not just buy an existing kit? The purpose of this "how-to" is to build a Water/Alcohol Injection kit that can attempt
to match the quality of the high-end ($400 and up) units that are currently available, but at a fraction of the cost.
If you follow these steps, you'll have a system that can deliver high performance, reliability, and quality water/alcohol injection at a much lower cost.
|